Automatized Topographic Mapping in Switzerland
Abstract
Engraving in the topographic mapping was substituted by digital methods originated on CAD-technology in Switzerland, in the beginning of 2001. At the same time there were two major projects started as well, with the objective that future production completely redirects towards producing the vector GIS-data: TLM and OPTIMA-LK.
Copyright (c) 2013 Nedjeljko Frančula
![Creative Commons License](http://i.creativecommons.org/l/by-sa/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.